CPU - Support for Intel Core i7 processors in the LGA2011 package - L3 cache varies with CPU Chipset - Intel C606 Express Chipset Memory - 8 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. - 4 channel memory architecture - Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules - Support for ECC memory modules - Support for Extreme Memory Profile (XMP) memory modules Audio - Realtek ALC898 codec - High Definition Audio - 2/4/5.1/7.1-channel - Support for S/PDIF Out LAN - 1 x Intel GbE LAN chip (10/100/1000 Mbit) (LAN1) - 1 x Realtek GbE LAN chip (10/100/1000 Mbit) (LAN2) Expansion Slots - 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots. - 1 x PCI Express x16 slot, running at x8 (PCIEX8) * The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode. - 1 x PCI Express x16 slot, running at x4 (PCIEX4) (The PCIEX16, PCIEX8, and PCIEX4 slots conform to PCI Express 3.0 standard.) - 1 x PCI Express x1 slot (The PCIEX1 slot conforms to PCI Express 2.0 standard.) - 1 x PCI slot Multi-Graphics Technology - Support for 3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology Storage Interface Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s devices - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. - 8 x SAS 3Gb/s connectors (SAS2 0~7) supporting up to 8 SAS 3Gb/s devices * The SAS connectors do not support optical drives. - Support for RAID 0, RAID 1, and RAID 10 Marvell 88SE9172 chip: - 2 x eSATA 6Gb/s connectors (including 1 eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB Chipset: - Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, including 1 eSATA/USB Combo, 6 ports available through the internal USB headers) VIA VL800 chip: - Up to 4 USB 3.0/2.0 ports on the back panel * Due to a Windows 7 limitation, please connect your USB device(s) to the USB 2.0/1.1 port(s) before the VIA USB 3.0 controller driver is installed. Fresco FL1009 chip: - Up to 2 USB 3.0/2.0 ports (available through the internal USB header) IEEE 1394 VIA VT6308 chip: - Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header) Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 8-pin ATX 12V power connector - 2 x SATA 6Gb/s connectors - 4 x SATA 3Gb/s connectors - 8 x SAS 3Gb/s connectors - 1 x CPU fan header - 4 x system fan headers - 1 x front panel header - 1 x front panel audio header - 1 x S/PDIF Out header - 1 x USB 3.0/2.0 header - 3 x USB 2.0/1.1 headers - 1 x IEEE 1394a port - 1 x Clear CMOS jumper - 1 x Trusted Platform Module (TPM) header - 1 x power button - 1 x reset button Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 1 x CPU overclocking button - 1 x BIOS switch button - 1 x Clear CMOS button - 1 x IEEE 1394a port - 4 x USB 3.0/2.0 ports - 5 x USB 2.0/1.1 ports - 1 x eSATA/USB Combo connector - 1 x eSATA 6Gb/s connector - 2 x RJ-45 ports - 1 x optical S/PDIF Out connector - 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) I/O Controller - iTE I/O Controller Chip H/W Monitoring - System voltage detection - CPU/System temperature detection - CPU/System fan speed detection - CPU overheating warning - CPU/System fan fail warning - CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS - 2 x 64 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features - Support for @BIOS - Support for Q-Flash - Support for Xpress Install - Support for EasyTune * Available functions in EasyTune may differ by motherboard model. - Support for ON/OFF Charge - Support for 3TB+ Unlock - Support for Q-Share - Support for 3D Power Bundle Software - Norton Internet Security (OEM version) Form Factor - E-ATX Form Factor; 30.5cm x 26.4cm
Скачать