Gigabyte G1.Sniper 3 (rev. 1.0) Intel LAN Driver 17.2 for Windows 7/Windows 8

Specifications: CPU - Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package - L3 cache varies with CPU Chipset - Intel Z77 Express Chipset Memory - 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. - Dual channel memory architecture - Support for DDR3 1600/1333/1066 MHz memory modules - Support for non-ECC memory modules - Support for Extreme Memory Profile (XMP) memory modules Onboard Graphics Integrated Graphics Processor: - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. - 1 x HDMI port, supporting a maximum resolution of 1920x1200 - 1 x DisplayPort, supporting a maximum resolution of 2560x1600 Audio - Creative CA0132 chip - Support for Sound Blaster Recon3Di - High Definition Audio - 2/5.1-channel - Support for S/PDIF Out LAN - 1 x Qualcomm Atheros Killer E2201 LAN chip (10/100/1000 Mbit) (LAN1) - 1 x Intel GbE LAN phy (10/100/1000 Mbit) (LAN2) * Teaming is not supported. Expansion Slots - 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots. - 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2) * The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated. (The PCI Express x16 slots conform to PCI Express 3.0 standard.) * To support PCI Express 3.0, you must install an Intel 22nm CPU. - 2 x PCI Express x1 slots (The PCI Express x1 slots conform to PCI Express 2.0 standard.) - 1 x PCI slot Multi-Graphics Technology - Support for 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology * The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX/NVIDIA SLI is enabled. Storage Interface Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices - 1 x mSATA connector * The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. 2 x Marvell 88SE9172 chips: - 4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB Chipset: - Up to 2 USB 3.0/2.0 ports on the back panel - Up to 4 USB 2.0/1.1 ports (available through the internal USB headers) Chipset + 2 VIA VL810 Hubs: - Up to 8 USB 3.0/2.0 ports (4 ports on the back panel, 4 ports available through the internal USB headers) IEEE 1394 VIA VT6308 chip: - Up to 2 IEEE 1394a ports (available through the internal IEEE 1394a headers) Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 8-pin ATX 12V power connector - 1 x PCIe power connector - 6 x SATA 6Gb/s connectors - 4 x SATA 3Gb/s connectors - 1 x mSATA connector - 1 x CPU fan header - 4 x system fan headers - 1 x front panel header - 1 x front panel audio header - 2 x USB 2.0/1.1 headers - 2 x USB 3.0/2.0 headers - 2 x IEEE 1394a headers - 1 x Clear CMOS jumper - 1 x power button - 1 x Clear CMOS button - 1 x reset button - Voltage measurement points - 1 x BIOS switch - 1 x Trusted Platform Module (TPM) header Back Panel Connectors - 1 x PS/2 keyboard/mouse port - 6 x USB 3.0/2.0 ports - 1 x D-Sub port - 1 x DVI-D port - 1 x HDMI port - 1 x DisplayPort - 2 x RJ-45 ports - 1 x optical S/PDIF Out connector - 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone) I/O Controller - iTE I/O Controller Chip H/W Monitoring - System voltage detection - CPU/System temperature detection - CPU/System fan speed detection - CPU overheating warning - CPU/System fan fail warning - CPU/System fan speed control - * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS - 2 x 64 Mbit flash - Use of licensed AMI EFI BIOS - Support for DualBIOS - PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features - Support for @BIOS - Support for Q-Flash - Support for Xpress Install - Support for Xpress Recovery2 - Support for EasyTune * Available functions in EasyTune may differ by motherboard model. - Support for eXtreme Hard Drive (X.H.D) - Support for Auto Green - Support for ON/OFF Charge - Support for Q-Share - Support for 3D Power - Support for EZ Setup Bundle Software - Norton Internet Security (OEM version) - Intel Rapid Start Technology - Intel Smart Connect Technology - Intel Smart Response Technology - LucidLogix Virtu MVP * Make sure the monitor cable has been connected to the integrated graphics port(s) on the back panel. Form Factor - XL-ATX Form Factor; 30.5cm x 26.4cm

  • Разработчик: INTEL
  • ОС: Windows 7 / Windows 7 x64 / Windows 8 / Windows 8 x64
  • Размер: 75.8 MB
Скачать