EOC1650 - 802.11g Outdoor 200mW Bridge / Access Point with Dual Antennas HARDWARE SPECIFICATIONS: MCU/RF: Atheros AR2315 Memory: 32MB SDRAM Flash: 8MB Physical Interface: One 10/100 Fast Ethernet RJ-45 Reset Button One Antenna Switch One RP-SMA Connector LED Indicators: x Power (Status) x LAN (10/100Mbps) x WLAN (Wireless Activity) x Link Quality (Client Bridge mode) Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality Power Requirements: Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design Power Adapter: 24V/0.6A DC Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17 RF SPECIFICATIONS: Frequency Band: 2.412–2.472GHz Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK Operation Channels: 11 for North America Receive Sensitivity (Typical): IEEE 802.11g Mbps @ -92dBm Mbps @ -74dBm IEEE 802.11b Mbps @ -97dBm Mbps @ -89dBm Available Transmit Power (Average): IEEE 802.11g dBm @ 6~24Mbps dBm @ 36Mbps dBm @ 48Mbps dBm @ 54Mbps IEEE 802.11b dBm @ 1~11Mbps Antenna: Internal: Directional Panel Antenna; Peak Gain 7dBi Horizontal -3dB Bandwidth: 100° Vertical -3dB Bandwidth: 45° External: Detachable Omni Antenna; RP-SMA Type; Peak Gain 5dBi SOFTWARE FEATURES: Topology: Infrastructure Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11b/g (2.4GHz WLAN) Operation Mode: Access Point / Client Bridge / Client Router LAN: DHCP Server / DHCP Client VPN: VPN pass-through Wireless: Channel Selection (Setting varies by countries) Transmission Rate 802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps Long Distance Transmission: 1km to 30km Transmit Power Table Signal Strength LED Indicators (3 colors) PPPoE (Client Router mode) Security: WEP Encryption 64/128/152bits WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) .1x Authenticator Hide SSID in Beacons MAC Address Filtering (up to 50) Wireless STA (Client) Connected List QoS: WMM MANAGEMENT: Configuration: Web-Based Configuration (HTTP) Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update Administrator Setting: Administrator Password Change Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds) System Monitoring: Status, Event Log SNMP: v1, v2c MIB: MIB I, MIB II (RFC1213) Backup & Restore: Settings Through Web Time Setting: NTP (Auto Setting) / Manual Change ENVIRONMENT & PHYSICAL: Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F) Humidity (Non-condensing): 0% ~ 95% Typical Dimensions: L: 7.56” (192mm) x W: 1.89” (48mm) x H: 1.43” (36.2mm) Weight: 0.55lb. (250g)
Скачать