802.11g High Power 600mW Wireless Access Point / Bridge / Repeater / Router with Antenna Diversity & 802.3af PoE HARDWARE SPECIFICATIONS: MCU: Atheros AR2316, 180MHz Memory: 32MB SDRAM Flash: 8MB Physical Interface: LAN One 10/100 Fast Ethernet RJ-45 Reset Button Power Jack LED’s Status: Power (Status) LAN (10/100Mbps) WLAN (Wireless Connection) Power Requirements: Power Supply: 90 to 240VDC ± 10%, 50/60Hz (Depends on different countries) Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A Device: 12V/1A Regulation Certifications: FCC Part 15, CE RF SPECIFICATIONS: Frequency Band: 2.400–2.484GHz Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK Operation Channels: 11 for North America Receive Sensitivity (Typical): IEEE 802.11g 6Mbps @ -92dBm 54Mbps @ -74dBm IEEE 802.11b 1Mbps @ -97dBm 11Mbps @ -89dBm Available Transmit Power: IEEE 802.11g 26dBm @ 6~24Mbps 25dBm @ 36Mbps 23dBm @ 48Mbps 22dBm @ 54Mbps IEEE 802.11b 27dBm @ 1~11Mbps Antenna: Detachable Omni Antenna x2; RP-TNC Type; Peak Gain 5dBi SOFTWARE FEATURES: Topology: Infrastructure Operation Mode: Client Bridge / Access Point / WDS AP / WDS Bridge / Client Router / AP Router / Universal Repeater LAN: DHCP Server / DHCP Client WAN (Client Router / AP Router mode): PPPoE Router: NAT / NAPT VPN: VPN pass-through (PPTP, L2TP, IPSEC) Wireless: Wireless Mode 802.11b / 802.11g / SuperG Channel Selection (Setting varies by Country) Transmission Rate 802.11b/g: 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps Transmit Output Power Control Signal Strength Security: WEP Encryption 64/128/152bits WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.1x Authenticator (Access Point mode) 802.1x Supplicant-TTLS (Client Bridge mode) Hide SSID in Beacons Multiple SSID with 802.1q VLAN Tagging (up to 4 SSID)(Access Point mode) MAC Filter (Access Point mode) L2 Isolation (Access Point mode) Wireless STA (Client) Connected List Lock to AP MAC (Client Bridge mode) QoS: WMM MANAGEMENT: Configuration: Web-Based Configuration (HTTP) / Telnet Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update Administrator Setting: Administrator Password Change Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds) System Monitoring: Status, Statistics and Event Log SNMP: v1, v2c MIB: MIB I, MIB II Backup & Restore: Settings Through Web ENVIRONMENT & PHYSICAL: Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F) Humidity (Non-condensing): 5% ~ 95% Typical Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm) Weight: 0.77lb. (350g)
Скачать