Specifications: CPU 1. Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium Dual-Core processor/Intel Celeron processor in the LGA 775 package (Note) This motherboard is designed with VRD11.1 power phase, and cannot be compatible with VRD10 designed CPU. Please refer to "CPU Support List" for details. 2. L2 cache varies with CPU Front Side Bus 1. 1600/1333/1066/800 MHz FSB Chipset 1. North Bridge: Intel P45 Express Chipset 2. South Bridge: Intel ICH10R Memory 1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory 2. Dual channel memory architecture 3. Support for DDR2 1333+/1066/800/667 MHz memory modules (Refer to Memory support list for more information) Audio 1. Realtek ALC889A codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel 4. Support for Dolby Home Theater 5. Support for S/PDIF In/Out 6. Support for CD In LAN 1. 4 x Realtek 8111C chips (10/100/1000 Mbit) 2. Support for Teaming Expansion Slots 1. 1 x PCI Express x16 slot, running at x16 2. 1 x PCI Express x16 slot, running at x8 (The PCIEx16 and PCIEx8 slots support ATI CrossFireX technology and conform to PCI Express 2.0 standard.) 3. 2 x PCI Express x4 slots 4. 1 x PCI Express x1 slot 5. 2 x PCI slots Storage Interface South Bridge: 1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices 2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 GIGABYTE SATA2 chip: 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices 2. 2 x SiI5723 chips (Smart Backup): -4 x SATA 3Gb/s connectors (GS0-Source, GS1, GS2-Source, GS3) supporting up to 4 SATA 3Gb/s devices - Support for Smart Backup (RAID 1) iTE IT8720 chip: 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive IEEE 1394a 1. T.I. TSB43AB23 chip 2. Up to 3 IEEE 1394a ports (via the IEEE 1394a brackets connected to the internal IEEE 1394a headers) USB 1. Integrated in the South Bridge 2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) Internal I/O Connectors 1. 1 x 24-pin ATX main power connector 2. 1 x 8-pin ATX 12V power connector 3. 1 x floppy disk drive connector 4. 1 x IDE connector 5. 10 x SATA 3Gb/s connectors 6. 1 x CPU fan header 7. 2 x system fan headers 8. 1 x power fan header 9. 1 x front panel header 10. 1 x front panel audio header 11. 1 x CD In connector 12. 1 x S/PDIF In header 13. 1 x S/PDIF Out header 14. 2 x USB 2.0/1.1 headers 15. 3 x IEEE 1394a headers 16. 1 x serial port header 17. 1 x chassis intrusion header 18. 1 x power LED header 19. 1 x power switch 20. 1 x reset switch 21. 1 x clearing CMOS switch Back Panel Connectors 1. 1 x PS/2 keyboard port 2. 1 x PS/2 mouse port 3. 1 x optical S/PDIF Out connector 4. 1 x coaxial S/PDIF Out connector 5. 8 x USB 2.0/1.1 ports 6. 4 x RJ-45 ports 7. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) I/O Controller 1. iTE IT8720 chip H/W Monitoring 1. System voltage detection 2. CPU/System temperature detection 3. CPU/System/Power fan speed detection 4. CPU overheating warning 5. CPU/System/Power fan fail warning 6. CPU/System fan speed control BIOS 1. 2 x 8 Mbit flash 2. Use of licensed AWARD BIOS 3. Support for DualBIOS 4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features 1. Support for @BIOS 2. Support for Q-Flash 3. Support for Quad BIOS 4. Support for Download Center 5. Support for Xpress Install 6. Support for Xpress Recovery2 7. Support for EasyTune 8. Support for Dynamic Energy Saver Advanced 9. Support for Ultra TPM 10. Support for Time Repair 11. Support for Q-Share Form Factor 1. ATX Form Factor; 30.5cm x 24.4cm
Скачать